How to Make Boat Seat Covers Out of Towels

Making your own boat seat covers out of towels is a great way to save money and customize your vessel. Plus, it’s a relatively easy project that can be completed in an afternoon. Here’s what you’ll need to get started:

-Two bath towels -One hand towel -Scissors

-Sewing machine (or needle and thread)

  • Cut two pieces of fabric or towel, each measuring 18 inches by 36 inches
  • Fold the fabric in half lengthwise, with the wrong sides together
  • Sew a seam along the long side, using a sewing machine and thread that matches the fabric
  • Turn the sewn tube of fabric right-side out so that the seam is now on the inside
  • Press the tube flat with your hands
  • Fold one end of the tube over about 1 inch, and sew a seam across it to create a pocket for an elastic band
  • Do this for both ends of the tube
  • Cut two lengths of elastic, each measuring 24 inches long
  • Insert one length of elastic into each pocket, and tie knots in the elastic to secure it in place
  • Trim any excess elastic from the ends

Recovering Boat Seats On A Budget

Diy Golf Cart Towel Seat Covers

Golf cart towel seat covers are a great way to add a bit of style and personality to your golf cart. They’re also a great way to protect your seats from the elements and keep them looking new. But, what if you don’t want to spend the money on pre-made seat covers?

Or, what if you want something unique that will really stand out on the course? Luckily, it’s easy to make your own golf cart towel seat covers with just a few supplies and some simple sewing skills. To start, you’ll need two bath towels, a yard of velcro, and a sewing machine.

If you don’t have access to a sewing machine, you can hand sew the covers, but it will be much more time consuming. Once you have your supplies gathered, lay one of the towels flat on a table or other surface. Fold the towel in half lengthwise so that it’s now half as long as it was originally.

Then, fold the towel in half again so that it’s now quarter of its original size. You should now have a long rectangle that is about 18 inches wide by 36 inches long. Repeat this process with the second towel so that you have two identical rectangles.

Next, take one of the rectangles and fold up one end so that it forms a pocket. Sew along the three sides of the pocket using a straight stitch; leave the fourth side open so that you can insert Velcro strips later on. Repeat this step with the other rectangle so that both pieces have pockets at one end.

Now comes the fun part – decorating! You can use fabric paint or markers to add designs, words, or anything else you can think of to personalize your seat covers. Let your creativity run wild!

Once you’re finished decorating, insert Velcro strips into each pocket flap and close them up. Make sure that the “hook” side of the Velcro is facing outward; this is what will attach to your golf cart seats later on. And there you have it – custom made golf cart towel seat covers!

How to Make a Golf Cart Seat Cover

As the weather gets warmer, many golfers are dusting off their clubs and hitting the links. If you’re one of them, you may be thinking about ways to spruce up your golf cart. A new seat cover is a great way to do that.

Here’s how to make a golf cart seat cover in just a few easy steps. First, you’ll need to gather your materials. You’ll need 1 yard of fabric (44 inches wide), 2 yards of piping (1 inch wide), and a sewing machine.

Next, cut your fabric into two pieces: one that is 44 inches by 16 inches, and one that is 44 inches by 22 inches. Then, fold each piece in half lengthwise with the wrong sides together and press flat. Now it’s time to sew!

Start by sewing the two long sides of each piece together with a 1/2-inch seam allowance, leaving the short ends open. Then, sew the piping onto one long side of each piece using a 3/8-inch seam allowance. Make sure to leave about 6 inches un-piped at the end so you can easily insert it into the cover later on.

Now it’s time to put it all together! Place the two pieces right sides together and sew around all four sides with a 1/2-inch seam allowance, making sure to leave an opening for turning at one end. Trim away any excess fabric or threads, then turn your cover right side out through the opening you left earlier.

Use a chopstick or other sharp object to poke out any corners that didn’t quite turn correctly.

How to Make Your Own Golf Cart Seat

Golf carts are a great way to get around the course, but they can be expensive. If you’re a handy person and have some basic welding skills, you can make your own golf cart seat for a fraction of the cost of buying one. Here’s what you’ll need:

-A sheet of metal (we used 18 gauge steel) -A welder -A drill

-1 inch hole saw -Paint or powder coat (optional) First, cut out two pieces of metal that will serve as the sides of your seat.

We made ours 16 inches wide and 14 inches tall. Then, use the welder to attach them together at the seams. Next, drill four holes in each side piece – two in the front and two in the back – that will line up with the existing holes in your golf cart’s frame.

This is where you’ll bolt the seat down. If you want, you can paint or powder coat your seat before attaching it to the golf cart. We went with a simple black paint job, but feel free to get creative!

once everything is dry, bolt your new seat into place and enjoy cruising around the course in style!

Golf Cart Seat Covers Measurements

When it comes to golf cart seat covers, there are a few things you need to take into consideration before making your purchase. The most important thing is the measurement of your golf cart seats. You will need to know the width, depth and height of your seats in order to find the perfect fit.

The width of your seat should be measured from the outside edge of one side to the other. The depth is measured from the front of the seat back to where it meets the backrest. And finally, the height is measured from the top of the seat back down to where it meets the bottom cushion.

Once you have these measurements, you can start shopping around for golf cart seat covers that will fit your seats perfectly. There are a variety of materials and styles to choose from, so take your time and find something that you really love!

How to Make Boat Seat Covers Out of Towels


How Do You Make Towel Seat Covers?

If you’re looking to add a personal touch to your bathroom or make it more spa-like, consider making your own towel seat covers. Here’s how: You’ll need:

-Towels (preferablyTerry cloth) in the size and shape of your toilet seat -A stapler -Scissors

Instructions: 1. Fold the towels in half lengthwise and then fold them in half again. You should now have a rectangle that’s about the same size as your toilet seat.

2. Cut two slits into the folded edge of the towels, evenly spaced apart. These will be used to thread the elastic through later. 3. Place the towel rectangles over the top of the toilet seat so that they overlap in the back.

Make sure that the cut edges are facing down and that the printed sides of the towels are facing outwards. 4 Use a stapler to secure the towels together at all four corners, going through all layers of fabric. 5 Cut a piece of elastic that’s long enough to go around your toilet seat plus an extra few inches for tying knots.

How Do You Cover Old Boat Seats?

Assuming you would like tips on how to reupholster old boat seats: Tools and Materials Needed: -Sewing Machine

-Upholstery Fabric -Scissors -Staple Gun

-Foam Padding -Batting -Thread

Instructions: 1. Remove the old fabric from the seat using a screwdriver or utility knife. Be careful not to damage the wood beneath.

If the foam is in good condition, you can reuse it. Otherwise, replace it with new foam. Make sure to measure twice and cut once!

2. Cut your upholstery fabric and batting to size, allowing for about an extra inch on all sides. Apply a layer of batting to the back of the fabric using a spray adhesive or pins. This will give the finished product a more polished look.

3. Place the fabric face down on top of the foam padding, then use a staple gun to attach it to the wooden base of the seat. Start at one end and work your way around, pulling tight as you go so that there are no wrinkles or bubbles in the fabric. Trim away any excess fabric before moving on to step 4. 4. Flip your seat over and admire your handiwork! If desired, you can add decorative buttons or welting around the edges for an extra touch of class.


This blog post outlines how to make boat seat covers out of towels. The author provides step-by-step instructions, including how to measure the seats, cut the towels, and sew them together. The author also includes photos to illustrate the process.