How to Make Bar Stool Seat Covers

Making your own bar stool seat covers is a great way to add a personal touch to your home décor. Not only can you choose the fabric and color that best suits your style, but you can also save money by not having to purchase new bar stools. If you’re not sure how to make seat covers, don’t worry – it’s actually quite easy.

Follow these steps and you’ll be sitting in comfort in no time.

  • Cut out a piece of fabric that is the same width and length as the seat of the bar stool
  • Fold the fabric in half, wrong sides together, and sew along the side and bottom edges with a ½-inch seam allowance
  • Turn the cover right side out, slip it over the seat of the bar stool, and tuck in the raw edges of fabric at the open end
  • Sew around the top edge of the seat cover with a ½-inch seam allowance, leaving an opening for inserting elastic
  • Cut a length of elastic that will fit snugly around the seat of the bar stool
  • Attach one end of the elastic to a safety pin and insert it through

DIY Bar Stool Reupholster | OFFER UP TRANSFORMATION | RIT DYE TUTORIAL

How to Make a Removable Bar Stool Cover

When you have bar stools in your kitchen or home bar, they can get pretty dirty from spills and everyday use. A removable bar stool cover is a great way to protect your stools and keep them looking clean. Here’s how to make a removable bar stool cover:

1. Cut a piece of fabric that is slightly larger than the seat of your stool. This will give you some wiggle room to sew the cover on without it being too tight. 2. Fold over the edges of the fabric and sew them down.

Make sure to leave an opening at one end so you can insert the padding or stuffing. 3. Insert the padding or stuffing into the cover and then sew up the opening. You may want to hand-sew this part so it’s extra secure.

4 .Attach Velcro strips to the underside of the cover and to the top of your stool seat. This will help keep the cover in place while you’re using it.

How to Make a Round Seat Cover With Elastic

Are you looking for a way to add some extra flair to your home décor? If so, you may want to consider making your own round seat cover with elastic. This is a relatively easy project that can be completed in just a few hours, and it’s a great way to personalize your space.

Here’s what you’ll need: -1 yard of fabric (44” wide) -1 spool of thread

-Scissors -Pins -Measuring tape or ruler

-Sewing machine -1/2” wide elastic (length will depend on the circumference of your chair) First, measure the circumference of your chair seat and add 2 inches.

Cut a piece of fabric from your yardage using this measurement. Fold the fabric in half widthwise and pin together. Sew along the pinned edge, using a 1/2” seam allowance.

Press the seam open. Next, fold the tube of fabric so that the seam you just sewed is at the center back of the tube. Pin together at this point and then sew another seam along the pinned edge, using a 1/2” seam allowance.

Press this seam open as well. Now it’s time to gather the fabric around the elastic. To do this, sew a line of stitches along one raw edge of the tube, about 1/4” from the edge. Make sure to leave long tails of thread at both beginning and end (about 6”). Do not knot these threads yet! Gently pull on one thread tail while pushing Fabric towards center so that it begins to gather on itself around elastic You will have to experiment here to get desired amount Of gathers—I usually aim for about double The width Of my original ungathered Tube before cutting off excess Elastic leaving about 3″ beyond where Your final gathering will end .Now tie Off threads securing gathers In place And cut off excess Elastic . Finally finish off raw Edge by sewing It closed either By hand Or machine .There you have It !

How to Sew a Round Stool Cover

If you have a round stool that needs a new cover, never fear! Sewing a round stool cover is not as difficult as it may seem. With just a few supplies and some patience, you can sew a beautiful new cover for your stool in no time.

Here’s what you’ll need: -1/2 yard of fabric (pre-washed) -Thread to match fabric

-Scissors -Pins -Chalk or other marking tool

-Sewing machine First, cut a large circle out of your fabric. You can use a plate or other circular object as a template.

Then, fold the circle in half and pin the raw edges together. Next, using chalk or another marking tool, draw a line from the center of the folded edge to the outer edge of the fabric circle. This will create two semi-circles.

Cut along this line. Unfold the fabric so that you have two separate pieces. Pin these raw edges together, matching up the curved edges.

Sew along this edge with a 1/2″ seam allowance, being sure to backstitch at the beginning and end of your seam. Now you should have one long tube of fabric with both ends open. Try slipping it over your stool to make sure it fits before proceeding to the next step! If it’s too big or small, simply adjust your seam allowance accordingly and re-sew. Once you’ve determined that your tube fits well around your stool, it’s time to sew the two raw edges together to create an enclosed cylinder. Again, use a 1/2″ seam allowance and be sure to backstitch at both ends of your seam.. Congratulations – you’ve now sewn yourself a brand new round stool cover!

How to Reupholster Curved Back Bar Stool

If you’ve ever found yourself admiring a beautifully upholstered chair or sofa and thought, “I could do that,” then reupholstering is definitely a project you should consider. Not only is it a great way to save money (custom furniture can be expensive!), but it’s also a fun way to personalize your space and get creative. Plus, it’s not as difficult as you might think—especially if you start with something simple like a curved back bar stool.

Here’s everything you need to know about how to reupholster a curved back bar stool: What You’ll Need: -fabric (enough to cover the entire surface of the stool plus an extra few inches)

-scissors -tape measure – staple gun

-foam padding (optional) -batting (optional) -decorative trim (optional)

The first step is to remove the old fabric from the stool. This can be done by carefully cutting around the staples with a pair of scissors and then pulling the fabric away from the wood frame. If there is any foam padding or batting attached to the old fabric, you can remove this as well.

Once all of the old fabric has been removed, use a tape measure to determine how much new fabric you will need. Add an extra few inches onto this measurement to account for any pattern matching or adjustments you may need to make while cutting your new piece of fabric. Cut your new piece of fabric according to your measurements and begin attaching it to the stool frame by stapling it into place along one side.

Continue stretching and stapling the fabric around all sides of the frame until it is completely covered. If desired, you can add additional foam padding or batting at this time for added comfort and support.

How to Make Bar Stool Seat Covers

Credit: www.craftcore.ca

How Do You Make a Bar Stool Seat Cushion?

If you have ever sat on an uncomfortable bar stool, you know how important a seat cushion can be. A seat cushion can make the difference between a pleasant experience and a painful one. If you are looking to add a seat cushion to your bar stool, there are a few things you will need to do.

First, measure the length and width of your bar stool seat. You will need to know these measurements so that you can purchase the correct size of seat cushion. Seat cushions come in a variety of sizes, so it is important to get the right size for your particular bar stool.

Once you have the correct size seat cushion, it is time to start attaching it to your bar stool. Most seat cushions have ties or Velcro strips on the back that will allow you to attach them easily to your bar stool. If yours does not have these attachments, you may need to use some other method of attachment such as staples or glue.

Be sure that whatever method you use is secure and will not come loose over time. Now that your seat cushion is attached, enjoy your newly comfortable bar stool!

How Do You Attach Fabric to a Bar Stool?

When it comes to attaching fabric to a bar stool, there are a few different methods you can use. One popular method is to use adhesive strips. You can find these at most craft or home improvement stores.

Another option is to use upholstery tacks. These usually come in a package with an upholstery hammer, which makes them easy to use. If you’re not sure which method to use, ask a sales associate at your local fabric or home improvement store for guidance.

How Much Fabric Do I Need to Cover a Barstool?

If you’re looking to cover a barstool, you’ll need about 1 yard of fabric. This will allow you to cover the seat and have some extra fabric to tuck around the edges. If you’re working with a patterned fabric, you may need slightly more fabric so that the design lines up evenly when wrapped around the barstool.

How are Bar Stool Seat Covers Measured?

When it comes to bar stool seat covers, there are a few things you need to take into account in order to get the perfect fit. First, you need to measure the circumference of the seat at its widest point. Next, you need to measure the height of the backrest from the top of the seat to the top of the backrest.

Finally, you need to determine how much coverage you want – do you want your bar stool seat covers to extend all the way down to the floor, or just cover part of the seat? Once you have these measurements, simply find a set of bar stool seat covers that will fit your stools like a glove!

Conclusion

Whether you’re redecorating your kitchen or looking to add a personal touch to your home bar, making your own bar stool seat covers is a great way to show off your style. With a few simple supplies and a little bit of time, you can create custom covers for your stools that will protect them from wear and tear and make them look great. To make bar stool seat covers, you’ll need fabric, scissors, an upholstery needle and thread, and some velcro.

Start by measuring the width and depth of your stoolseat, then cut a piece of fabric that’s slightly larger than those dimensions. Fold the fabric in half lengthwise and pin it together. Using a sewing machine or needle and thread, sew around the edge of the fabric, leaving about ½ an inch seam allowance.

Be sure to backstitch at the beginning and end of each seam. Cut two strips of velcro that are long enough to wrap around the circumference of the seat plus 1 inch. Sew one strip of velcro onto each side of the cover near the top edge.

Now all that’s left to do is slip your new cover over the seat of your stool and secure it in place with the velcro strips. You can use these same instructions to make covers for chairs or other furniture as well!